Mapei Ultraplan Renovation Screed 3240 25kg - Full Pallet - 40 Bags
- Downloads Mapei Ultraplan Renovation Screed 3240 Safety Data.pdf, Mapei Ultraplan Renovation Screed 3240 Technical Data.pdf
FULL PALLET - 40 x 25kg - FREE ECONOMY DELIVERY (Approx. 2-3 WORKING DAYS)*
*Full pallet deals are shipped directly from Mapei. For same day despatch, orders need to be placed before 12.30pm. A tail-lift will be specified for the unloading of the pallet. Please include any important delivery instructions/access in the "Notes" when completing your order.
Next Day Delivery is available for £42 (including VAT).
Mapei Ultraplan Renovation Screed is a fibre re-inforced self levelling compound, designed for use in the refurbishment of existing floors in both commercial and domestic applications.
- 3 to 40 mm in a single application
Ultraplan Renovation Screed is a fibre reinforced self levelling compound, designed for use in the refurbishment of existing floors in both commercial and domestic applications, it can be hand or pump applied.
WHERE TO USE
Used for interior levelling, smoothing and removing differences in thickness from 3 to 40 mm on new or existing concrete, screeds, stone, terrazzo and ceramic tiles, old and new timber floors, floor boards, chip-board panels, plywood, parquet. Ultraplan Renovation Screed is suitable where good resistance to loads is required, also for wheelchair traffic and underfloor heating systems.
Preparation of the Substrate
The substrate should be solid, free of dust, loose particles, paint, oil, gypsum residues or other substances that might compromise the bond. Timber substrates should be clean and solidly fixed, open joints should be sealed with Nivorapid mixed with Latex Plus. Cementitious surfaces that are not sufficiently solid must be removed or, where possible, consolidated with Prosfas or Primer EP. Cracks in the substrate should be repaired with Eporip. The substrate should be primed with Mapeprim SP or Eco Prim T prior to the application of Ultraplan Renovation Screed.
Apply in a single coat from 3 to 40 mm in thickness. Depending on the thickness required, a spiked roller may be used. The self levelling properties of Renovation Screed will give a finish ready to accept any kind of floorcovering without further attention.
Approx 6 sq./m at 3 mm thickness.
25 kg bags.