Concentrated cleaner with a very high yield for everyday cleaning and maintenance of surfaces.

FEATURES AND BENEFITS

Cleans effectively and non-aggressively, respecting the material and any protector applied. Suitable for use on: porcelain and ceramic tiles;

• Concrete flooring;
• Parquet with oil or paint finish;
• Terrazzo and terracotta;
• Marble, granite and all natural stone, perfect for use on polished natural stone that is sensitive to aggressive detergents;
• Quartz and marble agglomerates;
• Flooring in LVT, linoleum, rubber and PVC.
• Acrylic resin flooring created using Mapecoat TNS range.

PRODUCT INFORMATION

UltraCare Multicleaner is a concentrated cleaner. Its special formula guarantees a high level of cleanliness respecting the surfaces on which it is used. It is suitable for use on all washable surfaces, even the most delicate thanks to the neutral pH. It is also characterized by a pleasant scent.

UltraCare Multicleaner when diluted (1:200) does not require rinsing as it leaves no residues and/or halos on the surfaces and can be used both indoors and outdoors. It is effective for ordinary and extraordinary maintenance operations depending on the degree of dilution as detailed below.

Used regularly it keeps colours vivid and retains the appearance of the surfaces on which it is used.

RECOMMENDATIONS

• Never use UltraCare Multicleaner on waxed surfaces. In case of doubt, carry out a preliminary test in an inconspicuous area.
• Do not use UltraCare Multicleaner undiluted.
• When using UltraCare Multicleaner we advise to wear rubber gloves.
• Use on methacrylate baths only when diluted.
• UltraCare Multicleaner does not damage metal or galvanized surfaces; however, given the variety of
  materials available on the market, a preliminary test at different concentrations is always recommended.

APPLICATION METHOD

Dilute UltraCare Multicleaner with water in ratio from 1:20 to 1:200 depending on the degree of concentration required and the level of dirt to be removed.
UltraCare Multicleaner can be used diluted 1:30 to undertake the initial clean after installation on delicate surfaces.
For routine maintenance dilute UltraCare Multicleaner 1:200 (50 ml of product in 10 litres of water). In this dilution it is not necessary to rinse the treated surfaces.
For extraordinary maintenance or more resistant dirt use the product at higher concentrations up to 1:20 (500 ml of product in 10 litres of water). At these dilutions it is necessary to rinse the surfaces with water.
You can use the product altering the dilutions to those described above making it adaptable to your specific needs. The surface must be rinsed when used in a dilution other than 1:200. Please ensure that the surface is rinsed with plenty of clean water.
You can use UltraCare Multicleaner in floor cleaning machines following the instructions of the machine manufacturers.

CONSUMPTION

Diluted in a ratio of 1:200 with water it is possible to clean approximately 1500 sq./m, of surface area with a litre of UltraCare Multicleaner. Consumption may vary based on dilution, the degree and type of dirt and the surface to be treated

STORAGE

UltraCare Multicleaner, stored in the original packaging, has a storage time of 3 years