Mapei Ultracare Mould Remover Spray - 750ml

Mapei Ultracare Mould Remover Spray - 750ml

£10.44 inc.VAT (£8.70 ex.VAT)
In Stock (6)

UltraCare Mould Remover is an innovative formulation to be used for treating surfaces deteriorated by moulds and algae. It quickly removes moulds and

Additional Products (Optional)

£10.44 inc.VAT (£8.70 ex.VAT)
Adding to cart… The item has been added

Have a question? Get in touch

01937 534577

Share this

  • Downloads

High penetration detergent for mould removal, with immediate effect

ADVANTAGES:

  • It hygienically cleans stone surfaces, stone, render (including painted render), cement, Terracotta, grouts, ceramic, glass and brick
  • It quickly removes moulds
  • Quick and simple application

WHERE TO USE

UltraCare Mould Remover is an innovative formulation to be used for treating surfaces deteriorated by moulds and algae. It quickly removes moulds and hygienises stone surfaces, stone, render (including painted render), cement, Terracotta, grouts, ceramic, glass and klinker.

TECHNICAL CHARACTERISTICS

UltraCare Mould Remover quickly removes moulds when applied on the surface of the material to be treated.

RECOMMENDATIONS

  • Do not spray on metal surfaces, wood, plants or fabric. In case of accidental contact, wash thoroughly with clean water.
  • Do not use on polished stone.
  • Due to the very wide range of materials available on the market, we recommend carrying out a preliminary test on a hidden part of the surface, in order to evaluate the compatibility of the product before applying it on the whole surface (especially to verify possible colour variations on decorative coatings).
  • It is advisable to use suitable protective clothing during application. If applied in interior, make sure the  environment is well aerated.

APPLICATION PROCEDURE

The product is ready to use and does not need to be diluted with water. Shake well before application.

Spray directly on the surface to clean holding the bottle in vertical position at approx. 20 cm distance. Spread the product evenly on the surface to be treated using a cloth to make it penetrate correctly. Remove any excess of product to avoid dripping.

For a stronger effect it is possible to apply the product more than once by repeating the procedure described above and waiting at least 15 minutes between each application.

After cleaning (wait at least 10 minutes) rinse the surface using a cloth or sponge dampened with only clean water.

CONSUMPTION

0.75 l of UltraCare Mould Remover cha treat up to 15 m of surface (one coat). Yield is heavily influenced by the absorbency level and the surface finish of the substrate to be treated

STORAGE

UltraCare Mould Remover may be stored for 2 years in its original packaging.

Related Products