LTP Grimex (Heavy Duty Grime Remover) - 1 Litre
Additional Products (Optional)
LTP Grimex (Heavy Duty Grime Remover) for travertine, limestone, sandstone, slate, marble, porcelain, granite, terracotta, quarry tiles, brick & external paving.
Suitable for interior & exterior use.
Effective for removing oil, grease, ingrained dirt grime and old wax layers.
Important: - Test the solution on an inconspicuous area before general application. Any alkalinity remaining on surfaces treated with this product should be completely neutralised.
This may be done with a little clean water applied by sponge.
Directions for use:
In mild cases and on absorbent tiles: Dilute one part LTP Grimex in 10 parts warm water. Apply with a cloth or mop. Wipe off thoroughly with a clean damp cloth.
In more severe cases:
Dilute one part LTP Grimex in 3 parts warm water. Apply liberally, spreading over surface of tiles. If necessary agitate with a scrubbing brush. Leave to react for 5-10 minutes, keeping wet with additional solution. Agitate surface again, mop up and rinse thoroughly with clean water.
In extremely severe cases:
Use undiluted and agitate with scrubbing brush or mechanical scrubber if necessary. Neutralise treated surface with clean water after use.
In mild cases - approximately 50m2
In more severe cases - approximately 20m2
In extremely severe cases - approximately 5-10m2
This product should not be used for every day cleaning of floors or walls that have been sealed.