LTP Cement Grout and Salt Residue Remover - 1 Litre

LTP Cement Grout and Salt Residue Remover - 1 Litre

£14.00 inc.VAT (£11.67 ex.VAT)
In Stock (13)

Interior & Exterior use for use on glazed and un-glazed ceramics slate, quarry tiles, brick terracotta & acid resistant natural stones.

Additional Products (Optional)

Bulk Discounts Available (prices inc.VAT)

Buy 2 or above for £13.06 each

Bulk prices are applied when you add to basket - Prices are inclusive of VAT.

£14.00 inc.VAT (£11.67 ex.VAT)
Adding to cart… The item has been added

Have a question? Get in touch

01937 534577
  • Downloads

A rapid action cleaning agent for removing cement residues, grout stain, salts, efflorescence and other similar deposits.
May also be used in dilute or concentrated form.

Interior & Exterior use

For all types of Porcelain, glazed ceramic, slate, quarry tiles, stone, brick, terracotta, sandstone, granite and unpolished natural stone.

In Brief

  • Rapid Action
  • Suitable for a large variety of stone and tile materials

Technical Features

  • High Performance
  • Rapid Action
  • Targets heavy or light films
  • Efflorescence Remover
  • Easy to Use
  • Walls & Floors
  • Interior & exterior use

Directions for Use

Always test/practice on an inconspicuous area before proceeding to ensure that the finished result is satisfactory.

Shake container well before use.

In mild cases and on non-absorbent surfaces:
Dilute 1 part Cement, Grout & Salt Residue Remover in 4 parts cool water.
Apply with a cloth or sponge wrung out in the solution.
Leave for up to 30 minutes.
Extract released residues using a sponge and water.

In more severe cases:
Dilute 1 part Cement, Grout & Salt Residue Remover in 1 part cool water.
Apply liberally and spread over surface. If necessary, agitate with a scrubbing brush or rotary scrubbing machine and leave to react for 5-10 minutes, keeping wet surfaces wet with additional Cement, Grout & Salt Residue Remover solution. 
Extract and rinse thoroughly with clean water.

In extremely severe cases:
Wet the surface to be cleaned and apply undiluted.
Agitate with a nylon pad, scrubbing brush or mechanical scrubber.
Immediately extract and rinse thoroughly with clean water.

N.B. Always dilute by adding product to water. Not the other way round. 
Always rinse surfaces thoroughly with cool clean water

Application 1 Ltr 5 Ltr 25 Ltr
Mild Cases 25m per coat 125m per coat 625m per coat

Severe Cases

15m per coat 75m per coat 375m per coat
Extremely Severe 5m per coat 25m per coat 125m per coat
Related Products