A Specialist Professional Product. Dissolves residues of epoxy grout, brush-in systems, similar organic substances such as resins, sealants, oil and grease deposits, paint, adhesives, plastic residues, etc. Suitable for ceramic and quarry tiles and rough natural and artificial stones. Not suitable for polished or acid sensitive stone.
Suitable for indoor and outdoor use.
Description
This special remover is based on acidic reaction compounds supported by select, highly active organic solvents. In many cases Lithofin Resin-EX can be used instead of (dangerous and environmentally harmful) CFC-based cleaning products.
Properties
Lithofin Resin-EX penetrates into many organic substances and dirt deposits, dissolving them from the surface. The gel like consistence simplifies the application.
Field of Use
To remove epoxy grout materials and residues. Also highly suitable for removing organic substances such as resins, sealants, coatings, oil and grease deposits, paint (graffiti), lacquer, adhesives, plastic residues, etc. Suitable for indoor and outdoor use. Surfaces: All quarry and ceramic tiles, rough natural stones such as granite, gneiss, quartzite as well as concrete and concrete stone.
Directions for Use
Test the product prior to use. Always apply to a dry surface. Protect surface from wetness during working time because water represses the effectiveness. Application /surface temperature: 10 - 30 degree celcius. The mentioned working times are shorter at higher temperatures and longer at colder temperatures.
Directions to remove pavement fixing mortar
Generously apply to the dry surface using a brush or a scrubber. Allow to work for up to approx. 20-30 min. at room temp. of about 20 degree celcius. Then add water (best if diluted 1:10 with Lithofin MN Power-Clean) and brush. Afterwards, rinse and brush. Always brush diagonally to grouts. Rinse surface again with water. In case of any leftovers, repeat when surface is dry. Coverage: up to approx. 5 m²/L, depending on dirt.
Directions to remove epoxy resin (2K) mortar
Generously apply to the dry surface using a brush or a roller. Allow to work for approx. 3 hrs at about 20 degree celcius. Then use a rough pad (ex. green pad for glazed tiles) to work through. Add water and continue to scrub. Remove excess fluid and rinse with water immediately. Coverage: up to approx. 20 sq./m on glazed tiles.
Storage
Cool and closed, shelf life of up to 2 years.
Environmental Protection
Free of chlorinated hydrocarbons (CHC). Contains organic solvents. Disposal: waste code according to EWC/AVV 07 06 04*. Bottles/canisters are made of environmentally friendly polyethylene or tinplate and can be recycled (see information on label)
