Lithofin MN Wash and Clean for Natural & Artificial Stone - 5 Litre

A highly concentrated maintenance product which cleans natural stone surfaces quickly and effortlessly. Specially formulated to support and enhance the protection of impregnators and finishes on natural stone. Very economical to use.

A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). Lithofin MN Wash & Clean is a high-yielding cleaning and maintenance concentrate, which contains active maintenance components and mildly alkaline cleaning agents based on natural soaps.

Properties:
Highly effective agents take up the dirt and so it can easily be removed by wiping. The remaining extremely thin care film is free of wax and does not build any layers. With continued use, the surface’s appearance will improve in colour and structure. Lithofin MN Wash & Clean leaves a pleasant odour.

Field of Use:
For regular maintenance cleaning of all marble and natural stone surfaces.

Surfaces:
All natural stones such as carrara, travertine, jura marble, porphyr, serizzo, sandstone as well as engineered stone. The surfaces can be polished, honed or rough, impregnated sealed or untreated.

Directions for Use:
Lithofin MN Wash & Clean is always added to lukewarm water. One squirt (approx. 20ml) per 10 litres of water.

In case of absorbent, dirty surfaces use a bit more. After wiping, allow the residues to dry on the surface, do not rinse with clear water. Use either a floor mop, cloth or cleaning machine for wiping.

Coverage:
Lithofin MN Wash & Clean is a high-yielding concentrate and very economical. On large areas which are machine cleaned daily approx. 3 litresper 100m² will be needed per month.

Advice:
in areas subject to heavy wear and tear and on very dirty surfaces, it may be necessary to occasionally use Lithofin MN Power-Clean.

Further Maintenance:
Natural stone floors should be wiped regularly. Especially on polished marble, we recommend using Lithofin MN Wash & Clean three to four times, then using Lithofin MN Care-Sheen once.

Technical Data:
Density: 1,0 g/cm³
pH-Value: approx. 10 (concentrate)
Appearance: viscous, yellowish
Odour: pleasant
Solubility in Water: complete