Lithofin MN Power Clean - 1 Litre
- Downloads Lithofin MN Power Clean Technical Data.pdf, Lithofin MN Power Clean Safety Data.pdf
For thorough cleaning of severe, general and greasy dirt, residues of floor care products etc. For regular cleaning of high traffic and outdoor areas like shopping centres. For final cleaning of new surfaces at building sites. Recommended for all types of natural stone but especially for polished surfaces and limestone.
This special cleaner is nearly odourless and highly economic. Lithofin MN Power-Clean removes grease and oil,
all kinds of general and ingrained dirt as well as floor polish residues, old acrylic emulsions, care products, etc.
Field of Use:
For thoroughly cleaning used or exceptionally dirty natural stone surfaces and for initially cleaning newly
laid surfaces. Suitable for use on polished, finely honed and rough marble and other natural stones.
Facilitates removing cement residues from polished marble. Suitable for indoor and outdoor use.
Directions for Use:
Apply and evenly distribute Lithofin MN Power-Clean as supplied or diluted up to 1:5 depending on the
nature of the dirt. Allow the product to work for 10 to 20 minutes; brush occasionally. Do not allow to dry,
add water if necessary. Brush again before wiping up.
On large areas, use a squeegee to remove the product. Wash the surface thoroughly with clean
water. If the result is not satisfying, repeat allowing the product to work longer and brushing more vigorously.
Please Note: avoid splashes on sensitive areas such as metal or wood, painted or varnished surfaces,
wall paper, etc. We highly recommend trying the product in an inconspicuous area prior to use.
as supplied: approx. 5 to 10m² depending on dirt diluted: up to 30m²
Advice: for removing wax layers and the like, we recommend Lithofin WAX-OFF.
For cement residues and rust discolourations on granite and gneiss, use Lithofin MN Builder’s Clean.