On Sale

Lithofin KF Intensive Cleaner For Porcelain & Ceramic - 1 Litre

For occasional thorough cleaning or for regular cleaning of Porcelain tiled floors subjected to heavy wear. Removes stubborn dirt oil and grease. Suitable for all ceramic and porcelain finishes. Concentrate, extra stong, alkaline solvent free.
13881, 13913, 13768, 13877

Additional Products (Optional)

List Price: £21.80 inc.VAT
£16.72 inc.VAT (£13.93 ex.VAT)
(You save £5.08 )
Adding to cart… The item has been added
Available: In Stock (4)

A special product from the LITHOFIN-Range for fully vitrified ceramic and porcelain tiles (KF). Lithofin KF Intensive Cleaner is a strong alkaline product based on highly active and biologically degradeable components.

Technical Data:
Density: approx. 1,1 g/cm³
Appearance: liquid, yellowish
Odour: pleasant
pH-Value: >12
Flash Point: >65°C
Solubility in Water: --

Lithofin KF Intensive Cleaner dissolves and removes stubborn engrained dirt, oil and grease, rubber, care product residues, etc.

Field of Use:
For basic and thorough cleaning of surfaces where care with Lithofin KF Conditioning Cleaner is not sufficient and for regular use on surfaces subject to heavy wear and tear. Suitable for all polished and unglazed porcelain tiles.

Directions for Use:
Dilute Lithofin KF Intensive Cleaner up to 1:10 with cold or lukewarm water and distribute evenly on the surface with a brush or scrubber. Allow the product to work for 10 to 20 minutes, brushing occasionally and not allowing the product to dry. Remove from the surface with a cloth or with a wet and dry vac and rinse the surface with clear water.

Please Note:
Do not use on polished marble and other surfaces sensitive to alkali. Always try the product in an inconspicuous area prior to use.

as supplied: approx. 10 to 15m² depending on dirt diluted: up to 200m²

Keep closed, cool and dry. Shelf life of up to five years.

Environmental Protection:
Surfactants are biologically degradeable in accordance with EU-regulations.

Diluted product may be added to waste water. Containers are made of environmentally friendly polyethylene (PE). Clean containers can be recycled through collection systems.

Non-ionic surfactants; sodium potassiumhydroxide; carbonates; auxiliary agents.

Risk and Safety Phrases:
Causes burns. Keep locked up and out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Wear suitable protective clothing, goves and eye/face protection. In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

First Aid Procedures:
In case of inhalation ensure fresh air. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. Do not induce vomitting. If swallowed by mistake drink plenty of water and seek medical treatment.

Emergency Procedures:
In case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). Ensure adequate ventilation. Product does not burn, fire-extinguishing activities according to surrounding. Additional Information is listed on the Material Safety Data Sheet. ADR2003: caustic alkali liquid, n.o.s. UN 1719, Class 8 Packaging Group III

1 litre bottle with child-proof cap (10 per box)
5 litre canister (2 per box)

Please Note:
Statements concerning environmental and safety issues refer to the product as delivered (concentrated).

This information should be considered to be informal and non-binding. The products must be used according to local conditions and materials. Where no previous experience is available, or in cases of doubt, test the product in an inconspicuous area. (GB11.04gps/11.02)