Don't know how much levelling compound you need? Click here for our handy levelling compound calculator.

FULL PALLET - 48 x 20kg

*Full pallet deals are shipped directly from Mapei. For same day despatch, orders need to be placed before 12.30pm. A tail-lift will be specified for the unloading of the pallet. Please include any important delivery instructions/access in the "Notes" when completing your order. 

Next Day Delivery is available for £42 (including VAT).

Ultra-fast hardening self-levelling compound with very low VOC (volatile organic compound).

WHERE TO USE
Ultraplan Eco 3210 is used for interior levelling and removing differences in thickness from 3 to 10 mm of new or existing substrates, preparing them to receive any kind of flooring where excellent resistance to loads and traffic is needed.
Ultraplan Eco 3210 is particularly suitable for areas subject to wheeled traffic.
Ultraplan Eco 3210 is for interior use only.
Ultraplan Eco 3210 is suitable for screeds incorporating under floor heating systems and can be used as a self-leveller over electrical under floor heating systems.

Some application examples
• Levelling concrete slabs, sand cement screed, Mapecem and Mapecem Pronto, Topcem or Topcem Pronto, and anhydrite screeds containing underfloor heating.
• Levelling existing cement, terrazzo, ceramic and natural stone floors.

COVERAGE
One unit will cover approx. 4.5m² at 3mm thickness.

TECHNICAL CHARACTERISTICS
Ultraplan Eco 3210 is a grey powder consisting of special cements with rapid setting and hydration together with graded silica sand, resins and special additives, according to a formula developed in the MAPEI Research and Development Laboratories.
Mixed with water Ultraplan Eco 3210 becomes a highly uid and easily workable mortar, which is self-levelling, with high adhesion to the substrate and dries ultra-quickly.
Ultraplan Eco 3210 can be applied with an automatic pressure pump for distances over 100 m. Ultraplan Eco 3210 can be spread in thicknesses up to 10 mm per coat without shrinkage, cracking or crazing, and develops very high compressive and flexural strength, as well as resistance to indentation and abrasion.
Ultraplan Eco 3210 is ready to receive flooring after approximately 12 hours, regardless of the thickness.
It is recommended to wait 24 hours before installing wooden flooring.

RECOMMENDATIONS
• Do not add water to a mix which has already started to set.
• Do not add lime, cement or gypsum to the mix.
• Do not use Ultraplan Eco 3210 for exterior levelling work.
• Do not use Ultraplan Eco 3210 on substrates subject to continuous rising damp.
• If a further coat of Ultraplan Eco 3210 needs to be applied once the preceding one is completely dry, first apply Eco Prim T Plus.
• Do not apply Ultraplan Eco 3210 at temperatures below +5°C.

APPLICATION PROCEDURE
Preparation of the substrate
Substrates must be completely dry, solid, free from dust, loose areas, paint, wax, oil, rust and traces of gypsum.
Cement based surfaces not sufficiently solid must be removed or, where possible, consolidate with Prosfas or Mapeproof ESM. Fissures in concrete substrates must be repaired with Eporip.
Cementitious subfloors must be treated with a coat of Eco Prim T Plus diluted with water 1:2.
Anhydrite screeds can be levelled with Ultraplan Eco 3210, but must first be abraded to remove any surface laitance and then primed with a coat of Eco Prim T Plus (diluted with water 1:2), before the application of Ultraplan Eco 3210.
Ceramic and natural stone substrates must be cleaned with detergents and abraded and then primed with Eco Prim Grip Plus.
Preparing the mix
Pour a 20 kg bag of Ultraplan Eco 3210 into a bucket containing 4.8 to 5 litres of clean water and mix with a low speed electric mixer to obtain an homogeneous lump free mix.
Larger quantities can be prepared in on-site mixers.
After 2-3 minutes of slackening, restir the mix. The mix is then ready for use.
The quantity of Ultraplan Eco 3210 mixed at any time must be used within 20-30 minutes (at +23°C).
Spreading the mix
Apply Ultraplan Eco 3210 in a single coat from 3 to 10 mm with a large metal trowel or rake keeping the trowel slightly inclined to obtain the desired thickness.
Ultraplan Eco 3210 can also be applied with an automatic pressure pump.
Due to its exceptional self levelling properties Ultraplan Eco 3210 immediately loses small imperfections (trowel marks, etc.).
Ultraplan Eco 3210 is suitable to receive resilient, carpet, and ceramic floor coverings fixed after 12 hours at +23°C (the time can vary, depending on the room temperature and humidity).
When installing wood flooring or natural stone, wait 24 hours.
Cleaning
While still wet, Ultraplan Eco 3210 can be removed from tools with water.

PACKAGING
Ultraplan Eco 3210 is available in 20 kg bags.
STORAGE
Ultraplan Eco 3210 stored in a dry place is stable for at least 12 months. However, with time it could undergo a slower setting time but the final characteristics do not alter.

SAFETY INSTRUCTIONS FOR PREPARATION AND APPLICATION
Instructions for the safe use of our products can be found on the latest version of the Safety Data Sheet, available from
our website www.mapei.co.uk.
PRODUCT FOR PROFESSIONAL USE.