Mapei Mapeguard WP Adhesive for Sealing WP200 & Sealing Tape - 6.65kg
Two-component, rapid-drying elastic cementitious adhesive for bonding and sealing overlaps of Mapeguard WP 200 and Mapeguard WP 90 and associated gaskets, corners and tape.
14170, 14291, 14305, 15540
Additional Products (Optional)
Two-component, rapid-drying elastic cementitious adhesive for bonding and sealing overlaps of Mapeguard WP 200 and Mapeguard WP 90 and the relative special pieces
WHERE TO USE
- Bonding and sealing overlaps of Mapeguard WP 200 and Mapeguard WP 90.
- Bonding and sealing Mapeguard ST on Mapeguard WP 200 and Mapeguard WP 90
- Bonding and sealing Mapeguard IC, Mapeguard EC, Mapeguard PC.
- Mapeguard WP Adhesive is suitable for application in wall and floor areas.
TECHNICAL CHARACTERISTICS
Mapeguard WP Adhesive is a two-component, cementitious binder-based mortar with fine-grained selected aggregates, special admixtures and synthetic polymers in water dispersion, blended according to a formula developed in MAPEI’s own research laboratories. When the two components are mixed together, a blend with a plastic consistency is obtained. It may be applied by brush, by roller or by spraying
RECOMENDATIONS
- Only apply Mapeguard WP Adhesive if the temperature is above +5°C.
- Do not add cement, aggregates or water to Mapeguard WP Adhesive.
- Protect from water for the first 24 hours after application at +23°C.
SEE TECHNICAL DATA SHEET FOR MORE INFORMATION