A special product from the LITHOFIN-Range for porcelain, ceramic and quarry tiles (KF). The solvent free acrylate sealant can be diluted with water and is easy to use.

Properties:
Once dry, Lithofin KF Tile Polish forms a film that gives dull, matt and rough surfaces an elegant sheen. Dirt will no longer penetrate into the surface and can easily be wiped away. Rough surfaces become smoother and therefore easier to maintain. The film protects the surface, while at the same time enhancing its appearance by slightly darkening the colours. Existing marks of wear and tear are masked and become less visible.

Technical Data:
Density: approx. 1.0 g/cm³
pH-Value: approx. 9
Appearance: milky-white
Odour: nearly odourless

Field of Use:
Lithofin KF Tile Polish has been specifically developed for ceramic surfaces, such as unglazed, quarry and clay tiles. The surface film enhances the appearance and facilitates maintenance. Lithofin KF Tile Polish is not recommended for outdoor areas and for surfaces subject to heavy wear and tear. Not suitable for glazed and polished tiles.

Directions for Use:
The surface must be clean and completely dry. Remove dirt deposits and old care product residues with the suitable LITHOFIN cleaner. Evenly apply Lithofin KF Tile Polish in undiluted form using an applicator, sponge or lint free cloth. The product may be used diluted with water, if the surface is not very absorbent. The amount of product to be applied depends on the absorbency of the tile; make sure you leave a clearly visible film of moisture on the surface. A second coat can be applied, if needed. In cases of doubt, test in an inconspicuous area.

Drying Time:
Surface will be dry after approx. 40 to 60 minutes, depending on temperature and humidity.

Coverage:
Approx. 15 to 20m² per litre depending on surface.

Further Care:
Occasionally add Lithofin KF Tile Polish to the cleaning water (one cup per ten litres) to touch up and maintain the protective film.

Storage:
Closed and cool, frost free. Shelf life of up to 3 years.

Environmental Protection:
The contained surfactants are biologically degradable according to EU-regulations. Does not contain any phosphates.

Disposal:
Diluted product may be added to waste water. Containers are made of environmentally friendly polyetylene (PE). Clean containers can be recycled through collection system.

Contents:
Non-ionic surfactants (<5%), polymers, auxiliary agents.

General Information:
Keep out of reach of children. No health concerns once dry.

First Aid Procedures:
Remove contaminated soaked clothing immediately. No special measure necessary. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. In case of ingestion, do not induce vomiting. If swallowed by mistake drink plenty of water and seek medical treatment.

Emergency Procedures:
In case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). In case of fire formation of dangerous gases possible. Product does not burn, fire-extinguishing activities according to surrounding. Additional Information is listed on the Material Safety Data Sheet. ADR2003: not a dangerous good.

Packaging:
1 litre bottle with child-proof cap (10 per box)
5 litre canister (2 per box)

Please Note: statements concerning environmental and safety issues refe to the product as delivered (concentrated). This information should be considered to be informal and non-binding. The products must be used according to local conditions and materials. Where no previous experience is available, or in cases of doubt, test the product in an inconspicuous area. (GB12.05gps/4.03)