Shdiatool 14mm Diamond Core Drill Bits with M14 Thread for Porcelain, Tile, Granite, Marble

Shdiatool 14mm Diamond Core Drill Bits with M14 Thread for Porcelain, Tile, Granite, Marble

£11.16 inc.VAT (£9.30 ex.VAT)
In Stock (12)

Dry/Wet drilling for porcelain tile, wall tile, stoneware, granite, marble, stone, Masonry, brick....

Additional Products (Optional)

£11.16 inc.VAT (£9.30 ex.VAT)
Adding to cart… The item has been added

Have a question? Get in touch

01937 534577

Machine:

Suitable for an angle grinder M14 or with an adapter for a drill or cordless screwdriver.

Application:

Dry/wet drilling for porcelain tile, wall tile, stoneware, granite, marble, stone, Masonry, brick......        

Feature: 

  • Fast and Smooth drilling
  • Long Lifetime
  • Less Chipping
  • Minimizing any Breakage
  • Less loss of Material
  • Less heat Generation
  • Better Finish Quality

Surface Instructions for the use of the products

  • Appropriate protective measures should be taken before operation, such as wearing safety goggles, protective masks, hearing protection, protective clothing and protective gloves.
  • Ensure that the machine is disconnected from the power supply before installation/disassembly; ensure safe and correct installation on the correct machine.
  • When used on a machine with impact mode, do not use the impact mode, only the rotation mode.
  • It cannot be used as direct drilling.
  • Before processing, you can perform an idle test to see if there is an imbalance phenomenon; if there is an imbalance phenomenon, it is strictly forbidden to use.
  • Angle grinder Under 100mm diameter, 6000rpm is recommended, maximum 11000pm; 100mm and above, 3000pm is recommended, maximum 6000rpm.
    Hand Drill can be operated according to the maximum rpm of the machine; the product can only be mounted on a corded drill, but cannot be mounted on a cordless drill (insufficient power);
  • During the machining process, it is not necessary to apply excessive pressure, and it is necessary to maintain balance and uniform hole processing;
  • The need for timely treatment of surface dirt (you can use small brushes and other props to clean the surface);
  • Do not touch the surface after use to avoid burns.
Related Products