LTP Grout Stain Remover - Cement Limescale Grout Residue Remover 1 Ltr

LTP Grout Stain Remover - Cement Limescale Grout Residue Remover 1 Ltr

£7.62 inc.VAT (£6.35 ex.VAT)
In Stock (13)

Cement Limescale & Grout Residue Remover A rapid action cleaning agent for removing cement residues, grout stain efflorescence and other similar deposits. May be used in dilute or concentrated form.

Additional Products (Optional)

Bulk Discounts Available (prices inc.VAT)

Buy 2 or above for £7.10 each

Bulk prices are applied when you add to basket - Prices are inclusive of VAT.

£7.62 inc.VAT (£6.35 ex.VAT)
Adding to cart… The item has been added

Have a question? Get in touch

01937 534577

Share this

  • Downloads

Cement, Limescale & Grout Residue Remover A rapid action cleaning agent for removing cement residues, grout stain, efflorescence and other similar deposits. May be used in dilute or concentrated form. Interior & Exterior use For glazed and un-glazed ceramics, slate, quarry tiles, brick, terracotta & acid resistant natural stones.

Directions for use

In mild cases and on absorbent tiles:

Dilute 1 part Grout Stain Remover in 4 parts warm water. Apply with a cloth or sponge wrung out in the solution. Wipe off thoroughly with a clean damp cloth.

In more severe cases:

Dilute 1 part Grout Stain Remover in 1 part warm water. Apply liberally and spread over surface of tiles. If necessary, agitate with a scrubbing brush and leave to react for 5-10 minutes, keeping wet with additional Grout Stain Remover solution. Mop up and rinse thoroughly with clean water.

In extremely severe cases:

Use undiluted and agitate with scrubbing brush or mechanical scrubber if necessary. Neutralise treated surface with clean water after use. N.B.Always rinse surfaces throughly with clean water.

Notes Not suitable for use on surfaces that are calcareous, sensitive to acids (e.g. stainless steel, chrome, enamel etc), or contain lime (i.e. marble, travertine,limestone, engineered stone & sandstone containing iron). In conditions of extreme humidity LTP Grout Stain Remover vapour may react with acid sensitive surfaces. Any contaminated surface should be rinsed off immediately with plenty of clean water. Do not use when under floor heating systems are in operation. Important: - Always test the solution on a small inconspicuous area prior to general application. When using acid solution, prolonged contact with grout joints should be avoided.

Health & Safety

Contains Hydrochloric Acid <10%. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Avoid breathing spray. Keep away from food, drink and animal feeding stuffs. Dispose of contents/container to hazardous waste collection point. Label in Accordance With (EC) No 1272/2008

Coverage

Approximately 5-25m2 per litre.

Storage information

Store in a cool, dry, frost-free environment. Shelf Life – Up to 5 years

Related Products