LTP Boiled Linseed Oil - Traditional Pre-Polish Sealer - 2 Litre

A rich golden coloured oil ideal for protecting and enhancing machine and hand made terracotta. Fills and hardens within the open pores of the terracotta inhibiting the absorption of grime and fluids. Offers good mechanical strength to low fire hand
13993, 15541

Additional Products (Optional)

£19.87 inc.VAT (£16.56 ex.VAT)
cart-icon
Adding to cart… The item has been added
Available: In Stock (5)

Traditional Pre-Polish Sealer for Terracotta.

Interior use only

A rich golden coloured oil ideal for protecting and enhancing machine and hand made terracotta. Fills and hardens within the open pores of the terracotta inhibiting the absorption of grime and fluids. Offers good mechanical strength to low fire hand made terracotta.

IMPORTANT:

Do not let the oil oxidise on the surface of the tile. Remove any surplus, not absorbed into the tiles, within one hour of application using a clean cloth and, if necessary, a little Genuine Turpentine. Experiment on spare tiles to establish the number of coats required to achieve full saturation.

Directions for use

Apply by brush a coat at a time until the tiles are saturated. Allow at least 12 hours between each coat to ensure that the oil thoroughly oxidises. Most Terracotta will take one or two coats to reach saturation, while others, particularly some of the cruder hand made varieties, may take as many as four, five or even six coats. Leave the final coat to dry for at least 24 hours before polishing with LTP Clear or Antique Wax or finishing with LTP Ironwax Gloss or Satin.

Coverage

  • Medium Porosity Terracotta: 1-2 litres per 10m2
  • Higher Porosity Terracotta: 3-4 litres per 10m2

Storage information

Store in a cool, dry, frost-free environment.

Shelf Life – Up to 4 years for un-opened containers

Health & Safety

Keep out of the reach of children. Do not drink. Keep/Store away from clothing/combustible materials. Store in a closed container. Dispose of contents/container to hazardous waste collection point. May cause minor irritation on skin contact. May cause minor irritation on eye contact. Label in Accordance With (EC) No 1272/2008

DO NOT LEAVE SOILED APPLICATION CLOTHS WHERE THEY MAY CONSTITUTE A FIRE RISK, AS THEY ARE LIABLE TO SPONTANEOUS COMBUSTION.

Important: All rags and cloths used should be immediately burnt, or if this is not possible soaked in soapy water before disposing of in a bin. The application cloths should never be crumpled up into a ball.