On Sale

Lithofin MPP Marble Polishing Powder - 750g

Lithofin MPP (Marble Polishing Powder) is for touching up dull patches and for renewing worn off polishes on marble travertine and other calcium containing stones such as carrara, thassos, ajax, etc. as well as terrazzo and agglo marble. Not suitabl

Bulk Discounts Available (prices ex.VAT)

Buy 2 or above for £21.64 each

Bulk prices are applied when you add to basket - Prices are inclusive of VAT.

List Price: £27.22 inc.VAT
£22.08 inc.VAT (£18.40 ex.VAT)
(You save £5.14 )
cart-icon
Adding to cart… The item has been added
Available: In Stock

Description
A special LITHOFIN-Product formulated for the professional user. Lithofin MPP is a polishing powder based on oxalates and special additives.

Properties
Lithofin MPP transforms calcium particles in the surface of the stone, making them easy to polish. The polish is renewed and the surface once again has a high gloss finish.

Field of Use
For touching up dull patches and for renewing worn off polishes on marble, travertine and other calcium containing stones such as carrara, thassos, ajax, etc. as well as terrazzo and agglo marble. Not suitable for granite, quartzite, artificial stone, etc.  

Direction for Use

  • Preparation

    The surface to be treated must be clean and free of polymers, acrylates and wax layers. Use Lithofin MN Power-Clean or Lithofin WAX-OFF to thoroughly clean the surface. For touching up small surfaces or patches it is possible to polish by hand. This will only lead to a lower level of gloss; it is preferable to use a polishing machine. 

    On smaller surfaces we recommend polishing machines with approx. 1000 rpm. For floors, a one disc polishing machine with approx. 140 to 180 rpm, 40 to 50 kg, pressure of approx. 0,37 N/cm² to 0,52 N/cm² is necessary.

    Always use a white nylon polishing pad. Optimal results can be achieved on surfaces with a 300 to 400 polish. Treat larger surfaces in segments of max. 10 to 15m². 
  • Execution

    Wet the surface with plenty of water. Spread a small quantity of Lithofin MPP and immediately start polishing. When the product turns pasty, add some water and continue polishing until the desired gloss level is reached. Then immediately rinse the surface with Lithofin MN Power-Clean diluted 1:10 to 1:20 and remove the solution with a wet and dry vac or cloth. Do not allow any product residues to remain on the surface. Advice: it may be advisable to wet the surface with Lithofin MN Power-Clean rather than with water. This reduces the risk of matt stains due to splashes on already polished surfaces. On small areas, Lithofin MPP can be mixed with Lithofin MN Power-Clean to form a paste, which is easier to use.

Please Note 
Sensitive surfaces such as wood, parquet, carpets, etc. must be protected against splashes. Some types of stone difficult to polish. Always try the product in an inconspicuous area prior to use. Deep scratches can not be removed. Coverage: approx. 40m²/kg,

Application Temperature 
The temperature of the surface should be between 10°C and 25°C. Switch off underfloor heating.

Storage 
Keep closed and cool. Shelf life of up to 4 years. Environmental Protection Acids are largely neutralized during treatment. Disposal: product residues are classified as special waste. Containers are made of environmentally friendly polyetylene (PE). containers can be recycled through collection system.

Packaging
750g bottle with child-proof cap.