Lithofin KF Cement Residue Remover is a highly active cleaning concentrate based on a special composition of acids
and supporting agents. The product is nearly odourless and does not develop any corrosive vapours.

Lithofin KF Cement Residue Remover dissolves anorganic deposits such as cement and mortar
residues, residues of flexible grouting materials, efflorescence, rust and calcium deposits.
The residues can then be completely removed from the surface

Field of Use:
Due to its mild odour, Lithofin KF Cement Residue Remover is particularly suitable for indoor use.
For cleaning all ceramic surfaces, which need to be cleaned after laying and grouting. The original appearance of the surface is restored.
Surfaces: suitable for all acid resistant ceramic wall and floor tiles, quarry tiles, porcelain, clay and brick as well as terracotta surfaces.

Directions for use:
Dilute Lithofin KF Cement Residue Remover approx.1:4 with water depending on the stubbornness of the deposits.
Apply the solution to the wet surface and spread with a mop, white pad or scrubbing brush.
Redistribute several times.
After 10 minutes, brush the surface and rinse the solution with a sponge or a wet and dry vac.
Rinse well with clear water.
In case of cement based grouting materials, the dilution rate can be adjusted to 1:15.

Please Note: always test the product in an inconspicuous area prior to use.
Acid sensitive surface such as enamel, zinc, marble, limestone, certain decorative tiles, wood, etc. must be protected against splashes.

Coverage:
About 20 to 30m² depending on the type and degree of contamination..

Storage:
Keep cool with the container firmly closed. Shelf life of up to 4 years.

Safety:
Irritates the eyes and skin. Wash immediately if the cleaner comes into contact with the skin. Keep out of reach of children. Labelling requirements in accordance with Dangerous Material regulations or EC Guideline 88/379: Irritant. ADR/RID: Class 8. No.31c (Not applicable to cartons containing 1 litre bottles).

Contents:
As required by EEC recommendations: Acids, less then 5% non-ionic wetting agents, auxiliary agents.

Technical data:

• Density: 1.08g/cm3
• pH-value: <1 (concentrated)
• Appearance: clear, orange-red
• Odour: fruity-acidic

Packaging:
1L bottle with childproof cap (10 per carton) 5L canister (2 per carton)

Environmental Protection:
The acid components are substantially neutralised during the cleaning operation. As required by EC regulations, the wetting agents are biodegradable. Phosphate free.

Disposal:
May be added to waste water after dilution. The container is made from environmentally compatible polyethylene (PE) and can be recycled. After being rinsed out, containers may be disposed of through the useful material collection system.

This information is provided without guarantee. The product should be used taking into account the local conditions and the surface to be treated. In all cases of doubt, test the product first in an inconspicuous area.