Lithofin ASR PRO - Alkaline Special Remover for Stubborn Dirt Deposits - 1 Litre

On Sale

Lithofin ASR PRO - Alkaline Special Remover for Stubborn Dirt Deposits - 1 Litre

List Price: £25.60 inc.VAT
£18.84 inc.VAT (£15.70 ex.VAT)
(You save £6.76 )
Out of Stock

Lithofin ASR is a strongly alkaline heavy duty cleaner which dissolves and removes most stubborn engrained dirt as well as grease and oil, wax, paint, soot, care product encrustations, burnt-in grease, polymer films etc.

Additional Products (Optional)

List Price: £25.60 inc.VAT
£18.84 inc.VAT (£15.70 ex.VAT)
(You save £6.76 )

Have a question? Get in touch

01937 534577

Share this

Description:
A special cleaner from the LITHOFIN-line of professional use products.
Lithofin ASR is a strongly alkaline heavy duty cleaner, which is formulated on the basis of highly active, biologically degradable cleaning components and solubilisers.
The product is free of solvents, and it does not develop any unpleasant or harmful vapours.

Properties:
Lithofin ASR dissolves and removes most stubborn engrained dirt as well as grease and oil, wax, paint, soot, care product encrustations, burnt-in grease, polymer films, etc.

Field of Use:
For intensively cleaning and de-greasing ceramics and porcelain, brick, natural and concrete stone. Suitable for indoor and outdoor use.

Directions for Use:
Dilute Lithofin ASR up to approx. 1:3 to 1:5 with cold water, apply it to the surface and allow it to work for approx. 5 to 15 minutes. Brushing increases the effectiveness of the product.
Then rinse the surface several times with clear water, making sure that no product residues remain.
If you are not satisfied with the result, repeat this procedure either with a stronger concentration or with longer working times.
Do not allow the product to dry on the surface, if necessary add some water and brush. Please Note: we always recommend testing the product in an inconspicuous area prior to use.
Do not use on polished marble, resin-bonded stone and other surfaces sensitive to alkaline products, such as aluminium, some plastics, lacquered surfaces, etc.

Coverage:
10 to 20 m² per litre when used undiluted, up to approx. 100 m²/litre when used diluted.

Storage:
Keep cool and closed. Shelf life of up to 5 years.

Environmental Protection:
Surfactants are biologically degradable in accordance with EU-regulations.
Disposal: diluted product may be added to wastewater.
Containers are made of environmentally friendly polyethylene (PE).
Clean containers can be recycled through collection systems.
Safety: Ingredients: anionic surfactants; non-ionic surfactants; NTA; alkali; perfume; auxiliary agents. Label according to EU-Directive 1999/45/EG: C, corrosive.

Technical Data: 
Density: ca.1.2 g/cm³ pH-Value: 14 (concentrate) 
Appearance: liquid, yellowish, clear 
Odour: non-specific Solubility in water: complete 

Risk and Safety Phrases:
causes severe burns. Keep locked up and out of the reach of children. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Wear suitable protective clothing, gloves and eye/face protection.
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
First Aid Procedures: remove contaminated soaked clothing immediately.
In case of inhalation, take in fresh air. In the event of symptoms refer for medical treatment.
In case of contact with skin wash off immediately with soap and water.
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice.
In case of ingestion, do not induce vomiting. If swallowed by mistake drink plenty of water and seek medical treatment.

Emergency Procedures:
In case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). Product does not burn, fire-extinguishing activities according to surrounding.
Do not use full water jet for safety reasons.
Additional Information is listed on the Material Safety Data Sheet.

Related Products