Genesis Fast Fit Ramp System / Transition Bar - BRIGHT SILVER - TCR409.91
This aluminium rounded cover features an innovative hidden mechanical fixing mechanism, and is available in metallic and wood finishes.
Due to the pivot system incorporated into the fixing system and rounded cover, the TCR profile will accommodate height differentials of up to 18mm.
So it's ideal for use where most hard floor coverings meet a smooth or carpet type floor covering.
- Overall Width (W) = 40mm
- Length 920mm
1. Ensure that the TCR profile width cover the gap between the two floor coverings and that the two floor coverings are level.
2. Simply drill a 6ø hole in the floor at 25-30cm intervals for 1.85m and 15-20cm for the 0.92m to depth of approx 2-3cm. Starting approximately 5 cm in from each end.
3. Secure the PVC fixing plugs onto the top cover section of the profile, simply slide them along the profile by locking the top square section into the runner on the underside of the profile, lining them up with the pre drilled holes in the floor.
4. Push the screws into the holes, gently apply hand pressure lowering the profile into position and if required tap the cover section with a rubber mallet thus locking the profile into place and securing both floor coverings.