Everbuild Smooth Out Tool - Silicone Smoothing
The Smooth-Out tool is a unique tool that is ideal for smoothing out all sealant after application and it creates a perfect seal every time. Even better - you will have no edge marks and no mess!
This tool is really remarkable, once someone has used it they will never seal again without it.
Comes with 3 smoothing heads for Small (4-5mm), Medium (6-7mm) and Large (8-9mm)joint sizes
Directions for Use:
Cut the Cartridge nozzle at an angle of approx 60 degrees to create an opening that is slightly larger than the gap to be sealed.
Keeping an even pressure on the gun apply sealant sparingly.
DO NOT PUT TOO MUCH ON
Hold the Smooth Out Tool at a 45 degree angle making contact with both sides of the flexible rubber part of the blade and drag along the bead towards you.
Only minimal pressure is required, moving the handle upwards will give a smaller bead, down (i.e. flatter to surface being sealed) will give a larger bead.
Wipe excess sealant from tool. Any residual sealant can be peeled off the rubber blades when dry.
Use the smoothing blade already attached to the tool for small joint sizes 4-5mm.
Use the medium or large smoothing blades for larger joint sizes 6-9m.