Machine:
Suitable for an angle grinder M14 or with an adapter for a drill or cordless screwdriver.
Application:
Dry/wet drilling for porcelain tile, wall tile, stoneware, granite, marble, stone, Masonry, brick......
Feature:
- Fast and Smooth drilling
- Long Lifetime
- Less Chipping
- Minimizing any Breakage
- Less loss of Material
- Less heat Generation
- Better Finish Quality
Surface Instructions for the use of the products
- Appropriate protective measures should be taken before operation, such as wearing safety goggles, protective masks, hearing protection, protective clothing and protective gloves.
- Ensure that the machine is disconnected from the power supply before installation/disassembly; ensure safe and correct installation on the correct machine.
- When used on a machine with impact mode, do not use the impact mode, only the rotation mode.
- It cannot be used as direct drilling.
- Before processing, you can perform an idle test to see if there is an imbalance phenomenon; if there is an imbalance phenomenon, it is strictly forbidden to use.
- Angle grinder Under 100mm diameter, 6000rpm is recommended, maximum 11000pm; 100mm and above, 3000pm is recommended, maximum 6000rpm.
Hand Drill can be operated according to the maximum rpm of the machine; the product can only be mounted on a corded drill, but cannot be mounted on a cordless drill (insufficient power);
- During the machining process, it is not necessary to apply excessive pressure, and it is necessary to maintain balance and uniform hole processing;
- The need for timely treatment of surface dirt (you can use small brushes and other props to clean the surface);
- Do not touch the surface after use to avoid burns.
