Feature: 

• Fast and Smooth drilling
• Long Lifetime
• Less Chipping
• Minimizing any Breakage
• Less loss of Material
• Less heat Generation
• Better Finish Quality

Surface Instructions for the use of the products

• Appropriate protective measures should be taken before operation, such as wearing safety goggles, protective masks, hearing protection, protective clothing and protective gloves.
• Ensure that the machine is disconnected from the power supply before installation/disassembly; ensure safe and correct installation on the correct machine.
• When used on a machine with impact mode, do not use the impact mode, only the rotation mode.
• It cannot be used as direct drilling.
• Before processing, you can perform an idle test to see if there is an imbalance phenomenon; if there is an imbalance phenomenon, it is strictly forbidden to use.
• Angle grinder Under 100mm diameter, 6000rpm is recommended, maximum 11000pm; 100mm and above, 3000pm is recommended, maximum 6000rpm.
  Hand Drill can be operated according to the maximum rpm of the machine; the product can only be mounted on a corded drill, but cannot be mounted on a cordless drill (insufficient power);
• During the machining process, it is not necessary to apply excessive pressure, and it is necessary to maintain balance and uniform hole processing;
• The need for timely treatment of surface dirt (you can use small brushes and other props to clean the surface);
• Do not touch the surface after use to avoid burns.