Easy to apply oil-based impregnating sealer ideal for all types of stone including slate, terracotta, quarry and brick.
Strongly enhances the appearance.

For Interior & Exterior use.
For travertine, limestone, sandstone, slate, marble, terracotta, quarry tiles, brick and external paving.

Directions for use:
For application and cleaning tools see LTP website.
Shake well.
Surfaces should be completely clean & dry .
Apply sparingly using a soft cloth, paint brush or sealant applicator pad to the surface. Remove unabsorbed excess within 1 hour. Porous surfaces may require more than one application.
Leave to cure for a minimum of 24 hours before allowing traffic.
Keep as dry as possible for the first 3 days. External surfaces: no further treatment necessary.
Internal surfaces: can be finished with LTP Colour Intensifier or LTP Clear or Antique Wax or LTP Ironwax Satin or Gloss.
Important: Used cloths should be burnt as they may spontaneously combust. Allow good ventilation during application. Avoid working in direct sunlight; rapid oxidization may
inhibit effectiveness. Excess sealer that is left to dry on the surface can be removed with white spirit.

Coverage:
Lower porosity surfaces 15 sqm approximately per litre
Medium porosity surfaces 10 sqm approximately per litre

Aftercare:
Interior surfaces finished with LTP Ironwax Satin or Gloss, use LTP Floorshine.
Surfaces finished with LTP Stone Oil, Colour Intensifier, Clear or Antique wax use LTP Waxwash.

Storage information:
Store in a cool, dry, frost-free environment.
Shelf Life – Up to 4 years for un-opened containers