LTP Mattstone H2O is a natural finish water based impregnating sealer. Suitable for all types of natural and artificial stone, quarry, brick & paving. Honed, rough cut and polished surfaces.
For all types of natural and artificial stone, quarry, brick & paving. Honed, rough cut and polished surfaces.
A natural finish water based impregnating sealer. Delicately enhances colour. Helps protect against staining.
Strongly repels water, oil and grease. Allows surface to breathe.
Suitable for use on floors that have no damp proof course.
Maintain with LTP Waxwash for floors and LTP Stonewash for walls.
Directions for Use:
Preparation:
Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout.
If necessary, first wash surfaces with a dilute solution of LTP Grimex 1:10
Rinse well to remove residues and leave to dry (24hrs).
Rough cut, tumbled, textured or riven surfaces:
Shake bottle before use.
Apply generously and evenly using a paint brush or sponge. On highly absorbent surfaces apply further coats at hourly intervals until the surface is fully saturated. After 1 hour remove any excess sealer with an absorbent towel.
Do not allow residues to dry on the surface.
Honed, smooth and polished surfaces:
Shake bottle before use. Apply generously and evenly using a lint free cloth, lambs wool applicator, paint brush or sponge. Leave surfaces to dry.
Remove any residual sealer after 1 hour by rubbing with a dry microfibre cloth. On vertical surfaces apply from the bottom up.
Coverage: M² per coat
Lower porosity surfaces: 15m² per litre
Higher porosity surfaces: 7.5m² per litre
Polished surfaces: 30m² per litre
Aftercare:
Routinely sweep the floor and wash with LTP Waxwash. Clean walls and work surfaces with LTP Stonewash Spray.
