EcoProTec - Resin Polymer & Epoxy Residue Remover - 1 Litre
Removes all types of resin, grout polymer & epoxy residues.
A low odour non caustic treatment that softens residues left by jointing compounds and grouts making
removal from the surface of natural stone, glazed ceramics and porcelain much easier.
Interior & exterior use
Directions for Use:
Ensure that the surface to be treated is completely clean and dry.
If necessary, first wash surfaces with Ecoprotec Stone & Tile Intensive Cleaner. Rinse well with water to finish.
Apply generously by dabbing on with a cloth or brush.
Work in manageable areas of no more than 5 sq metres and do not brush out.
Leave for up to 30 minutes. Do not allow the solution to dry out.
If drying should occur within 30 minutes apply a little more solution to keep it wet.
Use a stiff short haired brush or emulsifying pad to remove softened coating from the surface.
Repeat the process if unwanted material remains.
If you are unsure of correct application methods, test on an inconspicuous area, prior to general application.
If removing residues from epoxy grout; apply making sure to avoid
prolonged contact with the joint as well. This solution should not drip if used on vertical surfaces.
However protect acrylic & other sensitive plastic surfaces such as baths and shower trays from contact.
Coverage: M2 per application
- 1 LTR - 10m²
- 5 LTR - 50m²
In extreme cases:
- 1 LTR - 3m²
- 5 LTR - 15m²
Do not apply during rain, frost, or when surface and air temp is under 5°C or over 30°C.
Use gloves and protective goggles if there is a risk of direct contact or splashing.
Empty containers are recyclable.
Clean application tools and brushes with water after use.
Once cleaned: Protect porous stone and porcelain with Ecoprotec Natural Finish Stone Sealer or
Ecoprotec Colour Enhancing Stone Sealer.