Jackoboard Aqua Line Easy have a four-sided fall to a modern linear drainage channel . Fully waterproof low profile base at only 30mm depth. The stainless steel drain cover is included with the tray, and is reversible to allow for a tiled insert.
Key Features:
- 550x65mm Channel
- End Drain Position (see technical drawing)
- Drain Cover positioned 175mm from Edge of Tray
- Incorporated four sided fall
- Shower element with brushed stainless steel drain channel
- Drainage rate of up to 0.6 l/s
- Stainless steel linear grate can be reversed and tiled
- Bar and frame made of stainless steel
- Fixed grate height of 15 mm
- Smooth, easy-clean surface with self-cleaning effect
- Low installation height
- Water trap height: 22 mm
Please Note: Jackoboard Aqua Line Easy - Horizontal Drain is not included and needs to be added in the "Additional Products".
Jackoboard Aqua Line Easy - Horizontal Drain
- Fits Jackoboard Aqua Line Easy system only
- Depth under installed tray of 93mm
- Fits DN50 / 2" ABS British Standard Waste Pipe
- Horizontal waste pipe connection.
JACKOBOARD® Aqua shower elements stand out not only due to their functionality – they are also an attractive design element making floor-level showers both practical and aesthetic. This combination is in demand in modern bathroom architecture because the bathroom has long since been more than a functional room and becomes a place to unwind and relax - ideally done in a stylish ambience.
The new channel drain board combines all the properties the bathroom and sanitary industry requires: incorporated fall, high drainage rate of up to 0.6 l/s with a low installation height. The drain channel is a fixed height of 15mm, suitable for use with 10mm thick tiles. Excellent appearance and availability in different dimensions, shapes and channel lengths. The drain channel remains visible with a classy brushed stainless steel look or the stainless steelbar can be inserted upside down and tiled on the back. Then the channel is no longer visible and disappears completely in the tile covering of the shower floor.
Fully Reversible & Tileable Drain Cover:
The upside of the drain cover is a brushed stainless-steel finish, if you prefer to tile the drain cover to match the surrounding floor, simply turn it over. The drain cover is ideal for tiling to match the surrounding floor, with a 12mm depth.
It can be installed by any competent DIY person and as the drain trough is already installed into the tray cuts down on install time.
If you have a concrete floor or if there is no access under the flooring to locate the shower drain, then the tray can still be used by using a separate raised substrate.
Notes for laying tiles and boards on JACKOBOARD® Aqua Line easy:
JACKOBOARD® Aqua Line easy is immediately tileable. All types and sizes of tiles can be used in principle. Special care must only be taken when using mosaic tiles less than 25 mm thick. In such cases, we recommend using epoxy resin grout for the tile joints.
If showers are to be wheelchair-accessible, they must be covered with tiles measuring a minimum 50 x 50 mm.
The tiles must be laid with a fall between the channel and the wall.
For installation instructions onto solid floor or timber structures, please see the Downloads tab.
Login /
Basket
